Introducing the All-New U3000 PRO – Now Available!
Description
NOTE: The Multiplexer Bundle can ONLY be used as an add-on accessory to a compatible Thinkware Dash Cam. The Multiplexer Bundle by itself cannot be used to record driving footage.
Compatible dash cams: U1000 Plus, Q850, Q200, F200 PRO, F790, X800 and X700
Installation guide: How to Install the Multiplexer box
Multiplexer Box Specifications
- Key:
piano code switch
composite screen can be configured according to switch combination - Power Source:
2 (BAT, GND)
DC 12 V ~ 24 V
Cable length: 3 m - AV-IN (For optional camera connection):
4 cables (CAM 1, CAM 2, CAM 3, CAM 4)
2.5 pi Stereo-jack type
AFHD
Cable length to connecting connector: 15 cm - AV-OUT(For front camera connection):
1 cable (AV-OUT)
2.5 pi Stereo-jack type
For front camera connection
Cable length: 3 m - Recording Channel: Up to 4 Analog Full HD cameras can be input (total 5CH)
- Composite Video: Full HD (1920 x 1080) @ 30 fps
- Dimensions (WxDxH): 65 x 65 x 17.5 mm (2.56 x 2.56 x 0.69 inch)
- Weight: 40.0 g (1.41 oz)
- Storage Temperature: -20°~ 70°C (-4°~ 158°F)
- Operating Temperature: -10°~ 60°C (14°~ 140°F)
Exterior Side View Camera Specifications
- Resolution: Full HD (1920 x 1080)
- Camera: 2.12 MP Pixelplus
- Frame Rate: 30 fps
- Viewing Angle: 129° (Diagonal)
- Input power source: DC 5 V
- Current Consumption: 140 mA
- Dimensions(WxDxH): 61.05 x 30.5 x 25.0 mm (2.40 x 1.20 x 0.98 inch)
- Weight: 57.0 g (2.01 oz)
- Cable Length: 1.5 + 3.0 m (4.9 + 9.8 ft)
- Storage Temperature: -20°~ 70°C (-4°~ 158°F)
- Operating Temperature: -10°~ 60°C (14°~ 140°F)
- Certifications: KC, CE, FCC, IC, RoHS, WEEE and VCCI
Interior Infrared Cabin Camera Specifications
- Resolution: Full HD (1920 x 1080)
- Camera: 2.12 MP Pixelplus
- Wavelength: 940 nm
- Frame Rate: 30 fps
- Viewing Angle: 160° (Diagonal)
- Dimensions (WxDxH): 61.1 x 30.5 x 32.3 mm (2.41 x 1.20 x 1.27 inch)
- Weight: 25.5 g (0.90 oz)
- Cable Length: 50 cm (1.6 ft)
- Storage Temperature: -20°~ 70°C (-4°~ 158°F)
- Operating Temperature: -10°~ 60°C (14°~ 140°F)
Additional information
| Bundles |
|---|
Reviews (3)
3 reviews for Multiplexer Bundle #1
| 5 star | 66% | |
| 4 star | 0% | |
| 3 star | 33% | |
| 2 star | 0% | |
| 1 star | 0% |
1-3 of 3 reviews
Add a review
Multiplexer Bundle #1
Your review
* Review is required
Name
* Name is required
Email
* Email is required
* Please confirm that you are not a robot
Installation Diagram
What's in the box
- Multiplexer Box
– Multiplexer Box
– Multiplexer Box Cable (with power cable)
– V-Out Cable
– Installation Guide - Interior Infrared Cabin Cameras
– Interior Infrared Cabin Camera
– Interior Camera Cable (0.5 m)
– Installation Guide - Exterior Side View Camera - 2ea
- Exterior Side View Camera with cable (1.5 m)
- Connecting Cable (3.0 m)
- Installation Guide - Accessory Camera Adaptor – U1000 Plus (0.3m) [TWAB-U1000PLADP]
- Accessory Camera Adaptor – Q850 (0.3m) [TWAB-Q850ADP]
- Rear View Camera Cable – ARC (7.5m) [TWAB-ARCCAB]
- U1000 Plus MB Cable (3m) [U1000PLMBCAB]
Great bundle with a good value and everything worked out of the box
I was disappointed 😔 that I cannot receive notifications to my phone for this camera system. It was picked by someone that was installing it. Great idea. But….I did not know that it doesn’t and can’t send notifications to my phone. I wish I could return it and get a camera system that does allow for that. However that would be too much to go through to uninstall the whole thing. Other than that disappointment the idea to have a camera on the outside of my vehicle was a wonderful idea and just what I was looking for. The cameras are tiny enough to fit right in with my car. That gets 5 stars. Great idea! I just wish I could get phone notifications vs going to the car to connect to view what took place.