Installation of the hardwiring cable to your vehicle’s fuse panel enables the built-in Parking Surveillance Mode in your THINKWARE Dash Cam, while you are away from your vehicle. To learn more, you can watch this hardwiring installation tutorial. Compatible with all THINKWARE Dash Cam models except for the F550.
Built-in Parking Surveillance Modes
- Motion Detection
- Impact Detection
- Time Lapse Mode*
- Energy Saving Mode*
*Available on Select Dash Cams
Available in two lengths
- Regular: 3.0m (10 ft)
- Long: 7.0m (23 ft)
Note1: If the fuse panel in your vehicle is either in the engine bay or the trunk, you may need the Long(7m/23ft) Hardwiring Cable.
Note2: Not compatible with THINKWARE F550 Dash Cam
WEIGHT: 0.140 kg
DIMENSIONS: 9 × 19 × 5 cm
SELECT CABLE LENGTH: Reg – 3m (10ft)
Anonymous –
William Leonard –
John S. –
Shoaib Hassan –
Anonymous –
Sturdy hardwire cable for professional looking installation.
(Vehicle specific comment, 14 Escape but likely generally applicable)
Could be maybe 3 in longer as the section below some A pillars requires an extra few inches running towards the back to get around obstructions and thus it gets tight at the fuse box or the camera if you want the cable running straight up the windshield to the headliner.
Roland Salazar –
First cable did not work. Long process to get resolved.
Anonymous –
Chris Martinez –
Hardwiring makes everything so much easier. No messy cables on the way
Eric Onatanian –
Did not have to use.
Fou –
Gotta be a bit savvy to install this bad boy.